Navigate the future with JN Bentley's highways solutions. We drive innovation in infrastructure, ensuring safe and efficient road networks North Wales Trunk Road Under a framework for North and Mid Wales Trunk Road Agency we deliver works such as the installation of noise mitigation and vehicle restraint barriers, like these pictured on the A55. Rampside Sea Wall In the North West of England we renewed the current sea wall by placing new rock armour wall to ensure it provided protection to the coast for years to come. Baitings Gate Bridge This project at Baitings Reservoir saw us marry our knowledge of the water industry with our highways expertise. We replaced the 105m bridge deck and constructed new bearings. Back Next About us Introducing JN Bentley Vision and values Publications Baitings Gate Bridge, which crosses the upstream end of Baitings Impounding Reservoir near Ripponden, West Yorkshire, required significant structural alterations. The brief for the project included the removal of the existing bridge deck structure, refurbishment of the pier heads where required, and construction of a new deck and bearings, designed and constructed to modern bridge standards. Operational constraints on water level led the team to propose a barge and crane arrangement (both in demolition and construction). The project utilised pre-cast concrete products and Building Information Modelling (BIM) to ensure efficient delivery. Baitings Gate Bridge Baitings Gate Bridge, which crosses the upstream end of Baitings Impounding Reservoir near Ripponden, West Yorkshire, required significant structural alterations. The brief for the project included the removal of the existing bridge deck structure, refurbishment of the pier heads where required, and construction of a new deck and bearings, designed and constructed to modern bridge standards. Operational constraints on water level led the team to propose a barge and crane arrangement (both in demolition and construction). The project utilised pre-cast concrete products and Building Information Modelling (BIM) to ensure efficient delivery. Baitings Gate Bridge Our first project with North and Mid Wales Trunk Road Agency was located on the eastbound slip road of the A55 North Wales Coast Road, near St Asaph. The project consisted of the installation of 115m of 2.5m-high noise mitigation barriers to reduce the noise levels heard by nearby residents. The second project was also located on the A55 Holyhead to South of Chester Trunk Road between Junctions 27 and 27a near St Asaph. The scope here consisted of replacing nearly 850m of vehicle restraint barriers in the central reservation. North Wales Trunk Road Our first project with North and Mid Wales Trunk Road Agency was located on the eastbound slip road of the A55 North Wales Coast Road, near St Asaph. The project consisted of the installation of 115m of 2.5m-high noise mitigation barriers to reduce the noise levels heard by nearby residents. The second project was also located on the A55 Holyhead to South of Chester Trunk Road between Junctions 27 and 27a near St Asaph. The scope here consisted of replacing nearly 850m of vehicle restraint barriers in the central reservation. North Wales Trunk Road This project, located in the North West of England, renewed the current sea wall to provide protection to the coast for years to come. Work included the removal of nearly 150m of existing concrete wall; tie-in to existing concrete; the extension of current drainage and formation of concrete structures to secure drainage in rock armour region; placing of geotextile liner and bedding; and the stacking of large stones uniformly to create rock armour, a stable permanent feature mitigating coastal erosion in the Rampside area. Rampside Seawall This project, located in the North West of England, renewed the current sea wall to provide protection to the coast for years to come. Work included the removal of nearly 150m of existing concrete wall; tie-in to existing concrete; the extension of current drainage and formation of concrete structures to secure drainage in rock armour region; placing of geotextile liner and bedding; and the stacking of large stones uniformly to create rock armour, a stable permanent feature mitigating coastal erosion in the Rampside area. Rampside Seawall To facilitate the training of their linesmen, National Grid proposed the construction of a new training overhead line at their training facility at Eakring, Nottinghamshire. The proposal comprised eight new T-Pylon test structures. The line spans approximately 1km over undulating land, which had previously been used for agricultural purposes. In order for this work to be undertaken and for the future maintenance and testing works, enabling works were required, including the provision of access tracks to each pylon locations. Eakring Access Roads To facilitate the training of their linesmen, National Grid proposed the construction of a new training overhead line at their training facility at Eakring, Nottinghamshire. The proposal comprised eight new T-Pylon test structures. The line spans approximately 1km over undulating land, which had previously been used for agricultural purposes. In order for this work to be undertaken and for the future maintenance and testing works, enabling works were required, including the provision of access tracks to each pylon locations. Eakring Access Roads We must deliver quality solutions in a cost and efficient way. Doing so ensures we add value for our clients and continue to thrive as an organisation. How do we achieve this? Through our Quality, Cost & Efficiency Strategy. Quality, cost and efficiency OUR APPROACH JN Bentley Ltd is part of the global management, engineering and development consultancy Mott MacDonald, offering our clients full feasibility, design and construction services throughout the UK. Who we are ABOUT Repeat business is the recognition that we’re looking for - but it’s nice to pick up an award or two along the way. Awards ABOUT We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH This is an overview of digital in JN Bentley, including our investment in digital delivery and our company digital transformation and how it is embedded in everything we do. Digital delivery OUR APPROACH Our aim is to reduce water consumption, minimise our waste, and use energy efficiently. Preserving resources OUR APPROACH We are accustomed to working with local authorities in road renewal, bridge refurbishment contracts, pedestrianisation projects and city/town centre enhancement programmes. Through this experience, we know how important it is to deliver projects with minimal disruption to members of the public. Where access through the site needs to be maintained, we understand the additional responsibility to protect members of the general public, as well as our own construction teams, operating to stringent operational safety standards. In our history we have undertaken a wide variety of projects and built lasting relationships with local authorities including The North and Mid Wales Trunk Road Agent, Sunderland City Council, Cumbria County Council, North Yorkshire County Council, Leeds City Council and Bradford Metropolitan Council, to name just a few. In addition to collaborating with local authorities, we often lend our highways experience to clients in others sectors, such as the award-winning Baitings Gate Bridge constructed for Yorkshire Water. Highways JN Bentley has traditionally held a presence in the highways and local authority sectors – with our workload growing in the sector in recent times. We have a large and dedicated workforce with experience in undertaking highway structures work and our team is familiar with the relevant Department for Transport Specifications for Highway Works. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

JN Bentley's page champions nature with projects for biodiversity and environmental stewardship, enhancing and protecting the environment Environment We understand our responsibility to the environment and are committed to continually improving how we not only protect the environment, but enhance it through our projects too. Enhancing the environment Our ability to deliver Nature Based Solutions continues to grow as we recognise the need to work with nature to address social, economic and environmental challenges. Environment We understand our responsibility to the environment and are committed to continually improving how we not only protect the environment, but enhance it through our projects too. Back Next About us Introducing JN Bentley Vision and values Publications Augmented reality Supporting society We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH Our aim is to reduce water consumption, minimise our waste, and use energy efficiently. Preserving resources OUR APPROACH Teamwork and collaboration Procurement with purpose Enhancing the environment We want to protect the environment and actively promote the improvement of our working areas. Our target is to achieve zero environmental harm events and legal breaches. Our 10 Green Rules and Operational Environmental Standards set out our basic environmental standards that we expect everyone to meet to minimise our impact, reduce the potential for harm, and enhance wherever we can. We promote environmental stewardship and continually monitor environmental awareness and engagement. It’s important to us that our people are engaged and empowered to identify and report environmental opportunities and risks, preventing potential incidents. We aim to go beyond compliance, seeking to protect and enhance biodiversity where we can. Our biodiversity net gain approach considers all aspects of the project lifecycle, collaboratively supporting our clients in the delivery of their biodiversity requirements and aspirations. Our ability to deliver Nature Based Solutions continues to grow as we recognise the need to work with nature to address social, economic and environmental challenges. The projects we’ve delivered so far have helped address numerous challenges and complement or substitute for some or all of the functionality provided by traditional engineering solutions. You can learn more in our Environmental Policy Statement. View our annual environmental performance in our latest annual review. We are certified against ISO 14001 for Environmental Management Systems. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

JN Bentley's "Carbon Reduction" page outlines a commitment to net-zero emissions by 2040, in line with global climate goal Carbon reduction Through engagement with our supply chain, we saved 25t of CO2e in two months by operating a low carbon, solar smart set up at our Thames Water site in Berkhamsted. Back Next About us Introducing JN Bentley Vision and values Publications Repeat business is the recognition that we’re looking for - but it’s nice to pick up an award or two along the way. Awards ABOUT JN Bentley Ltd is part of the global management, engineering and development consultancy Mott MacDonald, offering our clients full feasibility, design and construction services throughout the UK. Who we are ABOUT We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH Our aim is to reduce water consumption, minimise our waste, and use energy efficiently. Preserving resources OUR APPROACH We must deliver quality solutions in a cost and efficient way. Doing so ensures we add value for our clients and continue to thrive as an organisation. How do we achieve this? Through our Quality, Cost & Efficiency Strategy. Quality, cost and efficiency OUR APPROACH This is an overview of digital in JN Bentley, including our investment in digital delivery and our company digital transformation and how it is embedded in everything we do. Digital delivery OUR APPROACH Carbon reduction We aim to deliver low carbon solutions and reduce greenhouse gas emissions. As a design and build contractor within the infrastructure industry, we are in a position to make a significant positive impact in the UK’s ambitions to reduce emissions. We understand our responsibility to act and have set out our carbon commitment to be net zero across all our operations (Scope 1, 2 and 3 emissions) by 2040. Our carbon approach outlines our vision: to be an organisation which delivers low carbon infrastructure and is fully committed to mitigate the effects of global climate change as outlined in the Paris Agreement. Read our carbon reduction plan for more. Ways in which we are embedding our approach and ensuring we meet our commitment: Setting carbon targets validated by the Science Based Target initiative (SBTi) as part of Mott MacDonald (our parent company) . Implementing our road map to electrification for our company fleet. Delivering our low carbon solutions in design programme. Upskilling and training employees. You can read the progress made on carbon reduction in our latest annual review. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

JN Bentley's "Digital Construction" page details their integration of technology, processes, and data for efficient, safe, and quality construction Back Next About us Introducing JN Bentley Vision and values Publications Enhancing the environment Social outcomes and sustainability Digital design Procurement with purpose Pushing the boundaries Virtual reality Digital construction Digital construction combines processes, technology, people and information to achieve efficiency and improvements in construction – in programme, quality, cost, safety and carbon. Ways that we deliver construction digitally include: Common Data Environment (CDE) – a modern CDE ensures project data is easily accessible, understandable and accurate. We manage this information in line with our ISO 19650 certification. Valuable BIM data – because Mott MacDonald Bentley is an integrated design and build company, we can design assets to ensure safer and more efficient construction. This means including data such as setting out coordinates in 3D models that can be directly integrated into site engineering equipment, without the need for traditional drawings. Construction technology - whether our own fleet or through strategic hire partnerships, we use the latest site engineering equipment and construction plant. Examples include Leica iCON total stations and controllers, handheld and drone-based laser scanning, and intelligent excavators. Champions - to improve digital construction literacy we’ve formed a community of digital construction champions who share training, guidance, and best practice with the wider team. Case study: intelligent plant Outstrays to Skeffling Managed Realignment scheme involves the creation of new intertidal habitats at the Humber Estuary. The specification demands a natural look with no straight lines permitted, requiring a multitude of complex shapes to be designed at differing depths. This traditionally highly engineer-led work was delivered with Intelligent Machine Control which allowed the plant to work directly from a 3D model. Our plant operative visualises the design via onboard screens then operates the machine exactly to the design. Machine control features, such as auto-stop control, auto grade assist, auto tilt control, minimum distance control and bucket angle hold, help to improve accuracy - meaning the operator can safely rely on the system without digging too deep or damaging the surface. Case study: digital site engineering At a Water Treatment Works in the North East, we embedded digital construction tools and workflows to increase efficiency. The Leica iCON tablet allowed engineers to set out directly from the 3D model. They viewed the 3D design model directly from the cloud, selecting which points they want to mark out; viewed information about each element of the model; made calculations; and supported ground workers with design visualisation – all in the field. This gave the engineers complete autonomy and removed the need for 2D drawings. Case study: data capture At Esholt Wastewater Treatment Works, handheld laser scanners enabled our design team to collect point cloud data of an asset during a regular site walk around. This point cloud gave them accurate positional data of an asset of which they previously had little information on. The data facilitated a collaborative review session in virtual reality (VR) and enabled the team to make right first time design decisions prior to mobilising to site. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

JN Bentley's "Supporting Society" page emphasizes proactive social engagement, local employment, and sustainable development as core to their projects Community We lend our skills, time and expertise to help with local projects, often teaming up with our clients and supply chain to help out. School and college partnerships We partner with the education sector with the aim of opening pupils’ eyes to the world of work and engineering. Back Next About us Introducing JN Bentley Vision and values Publications Repeat business is the recognition that we’re looking for - but it’s nice to pick up an award or two along the way. Awards ABOUT JN Bentley Ltd is part of the global management, engineering and development consultancy Mott MacDonald, offering our clients full feasibility, design and construction services throughout the UK. Who we are ABOUT We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH Our aim is to reduce water consumption, minimise our waste, and use energy efficiently. Preserving resources OUR APPROACH We must deliver quality solutions in a cost and efficient way. Doing so ensures we add value for our clients and continue to thrive as an organisation. How do we achieve this? Through our Quality, Cost & Efficiency Strategy. Quality, cost and efficiency OUR APPROACH This is an overview of digital in JN Bentley, including our investment in digital delivery and our company digital transformation and how it is embedded in everything we do. Digital delivery OUR APPROACH Supporting society We act in the best interests of our communities and society as a whole. We proactively consider social outcomes throughout the whole project lifecycle, delivering benefits to communities, not as an add-on service but as an integral part of our approach. We seek to promote local employment and the use of local skills; deliver equal opportunities; build relationships with local educational establishments and support early careers; collaborate with the local supply chain and small and medium enterprises; and promote a strong culture of sustainable development to ensure we deliver wider value to society. Through our charitable giving, volunteering and community support activities, we aim to make a positive difference in communities where we operate; our efforts focus on offering skills, time and expertise. Our annual review takes a comprehensive look at ways in which we’ve supported society. Learn more policy statements for sustainability, social responsibility and social value . Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

JN Bentley's "Digital Rehearsal" optimizes construction planning with technology, aligning design and programs for enhanced safety and efficiency Back Next About us Introducing JN Bentley Vision and values Publications Teamwork and collaboration We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH Virtual reality We must deliver quality solutions in a cost and efficient way. Doing so ensures we add value for our clients and continue to thrive as an organisation. How do we achieve this? Through our Quality, Cost & Efficiency Strategy. Quality, cost and efficiency OUR APPROACH Digital construction Pushing the boundaries Digital rehearsal Digital rehearsal optimises how we plan the construction phase of our projects. It aligns design with the construction programme and drives collaboration between people and technology, enabling project teams to rehearse the construction sequence at the right time with the right set of people to identify the best sequence in terms of safety, supply-chain, operational site interfaces and temporary works logistics. Designers get a better understanding of buildability and construction teams understand the specification and any client operational constraints. Case study: Hallbank Tunnel Hallbank involved a short shutdown of an aqueduct supplying 2.5 million customers with 570 million litres of water a day. After nearly two years of main works, our client handed the entire site over to us to complete the connections. At its peak, 90 engineers on round-the-clock shifts worked at each connection. We developed a highly detailed 4D model that facilitated collaborative rehearsals with the team and ensured the operation was meticulously planned. The connections were a success, and the site was handed back to our client early. The 4D model maximised efficiency and supported collaboration between the design and construction teams. The model also helped to identify temporary works and process constraints, beyond the realm of 3D clash detection. Case study: Embsay Water Treatment Works During the investigation and tender stage at Embsay, SYNCHRO 4D was used to create a digital rehearsal to better understand sequencing on an extremely tight site. Outputs from the rehearsal led directly to programme updates, saving 10 weeks and over £100,000 in preliminary site costs. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

Explore JN Bentley's commitment to renewables. Driving innovation in sustainable energy solutions for a greener future Linton Falls Hydro We constructed a 120kW twin hydro turbine, on a small weir at Linton Falls on the River Wharf within the Yorkshire Dales National Park, bringing the asset back to life for the first time since 1948. Low Wood Hydro We installed two new Archimedean screw turbines as part of the refurbishment of the hydroelectric plant at the historic Low Wood Gunpowder Works within the scenic Lake District National Park. Tees Barrage We redeveloped this white water course to create a world-class training facility used in the 2012 Olympic Games. The project, at the time, was the only installation where Archimedean screws were used as both pumps and generators. Back Next About us Introducing JN Bentley Vision and values Publications JN Bentley constructed a 120kW hydro turbine, on land owned by the business on a small weir at Linton Falls on the River Wharf, near Grassington in the Yorkshire Dales National Park. The original Linton Falls plant was built in 1909 bringing the first electricity to the village of Grassington, but was left out of commission since 1948, and has been protected as a Scheduled Monument. The construction project reinstated a hydro-electricity facility, incorporating two Archimedean screw turbines, to once again supply the Grassington area by feeding locally into the Grid. Linton Falls Hydro JN Bentley constructed a 120kW hydro turbine, on land owned by the business on a small weir at Linton Falls on the River Wharf, near Grassington in the Yorkshire Dales National Park. The original Linton Falls plant was built in 1909 bringing the first electricity to the village of Grassington, but was left out of commission since 1948, and has been protected as a Scheduled Monument. The construction project reinstated a hydro-electricity facility, incorporating two Archimedean screw turbines, to once again supply the Grassington area by feeding locally into the Grid. Linton Falls Hydro The project, located at the historical Low Wood Gunpowder Works within the scenic Lake District National Park, comprised of the refurbishment of the hydroelectricity plant. The works, which were on an English Heritage Scheduled Monument status site, required new intake sluice gates, the construction of an access bridge, the demolition of the existing power house and construction of a new power house, installation of rock armour and gabions to the tailrace and all preparatory work to allow the installation of the two new Archimedean screw turbines and associated equipment by Spaans Babcock. Low Wood Hydro The project, located at the historical Low Wood Gunpowder Works within the scenic Lake District National Park, comprised of the refurbishment of the hydroelectricity plant. The works, which were on an English Heritage Scheduled Monument status site, required new intake sluice gates, the construction of an access bridge, the demolition of the existing power house and construction of a new power house, installation of rock armour and gabions to the tailrace and all preparatory work to allow the installation of the two new Archimedean screw turbines and associated equipment by Spaans Babcock. Low Wood Hydro The course is located on the River Tees adjacent to the Tees Barrage. The project comprised a redevelopment of the course to create a world-class white water facility. The project at the time was the only installation in the world where Archimedean screws were used as both pumps and generators. The screws were particularly large, delivering a maximum flow rate of 14m3/s. Further elements included the design and construction of the new RC pumping station, construction of associated penstocks, stop logs and a fish pass; raising of concrete channel walls; excavation and construction of a new, steeper ‘short course’. Tees Barrage The course is located on the River Tees adjacent to the Tees Barrage. The project comprised a redevelopment of the course to create a world-class white water facility. The project at the time was the only installation in the world where Archimedean screws were used as both pumps and generators. The screws were particularly large, delivering a maximum flow rate of 14m3/s. Further elements included the design and construction of the new RC pumping station, construction of associated penstocks, stop logs and a fish pass; raising of concrete channel walls; excavation and construction of a new, steeper ‘short course’. Tees Barrage As part of an overall upgrade to the treatment works at Esholt, we designed and managed the installation of two hydrodynamic screws. The hydropower installation utilises the 10m head drop between the inlet works and the new primary tanks, with the power generated assisting in meeting the base load of the new activated sludge secondary treatment plant. We were responsible for construction of the inlet chamber, and plinths for the 2.6m diameter screws and oversaw the subcontracted hydropower and electrical works. Esholt WwTW As part of an overall upgrade to the treatment works at Esholt, we designed and managed the installation of two hydrodynamic screws. The hydropower installation utilises the 10m head drop between the inlet works and the new primary tanks, with the power generated assisting in meeting the base load of the new activated sludge secondary treatment plant. We were responsible for construction of the inlet chamber, and plinths for the 2.6m diameter screws and oversaw the subcontracted hydropower and electrical works. Esholt WwTW Working collaboratively with the client, we delivered a hydroelectric generation facility within Eccup Water Treatment Works (WTW), situated near Leeds, West Yorkshire. We also worked in partnership with suppliers to develop, install and commission a horizontally mounted Francis turbine with asynchronous generator in a new ‘hydro-turbine building’, upstream of Eccup WTW inlet works. The installation is fully integrated with the previously existing operation of the inlet works for ease of operation, to enable generation of up to 700MWh of electricity per annum. Eccup Hydro Working collaboratively with the client, we delivered a hydroelectric generation facility within Eccup Water Treatment Works (WTW), situated near Leeds, West Yorkshire. We also worked in partnership with suppliers to develop, install and commission a horizontally mounted Francis turbine with asynchronous generator in a new ‘hydro-turbine building’, upstream of Eccup WTW inlet works. The installation is fully integrated with the previously existing operation of the inlet works for ease of operation, to enable generation of up to 700MWh of electricity per annum. Eccup Hydro At Grmwith, water is released to river from the reservoir for abstraction downstream. Energy was being lost and offered an opportunity for energy recovery/generation from a turbine. The project comprised of the installation of a 250kW Francis Turbine within an existing chamber at Grimwith Reservoir, recovering energy from the water before it is discharged. The scope of work included the supply and installation of the turbine; modifications to the existing chamber; new 800mm diameter flowmeter to measure and record turbine flows; modification to pipework and valves; electrical installation and SCADA modifications. Grimwith At Grmwith, water is released to river from the reservoir for abstraction downstream. Energy was being lost and offered an opportunity for energy recovery/generation from a turbine. The project comprised of the installation of a 250kW Francis Turbine within an existing chamber at Grimwith Reservoir, recovering energy from the water before it is discharged. The scope of work included the supply and installation of the turbine; modifications to the existing chamber; new 800mm diameter flowmeter to measure and record turbine flows; modification to pipework and valves; electrical installation and SCADA modifications. Grimwith This is an overview of digital in JN Bentley, including our investment in digital delivery and our company digital transformation and how it is embedded in everything we do. Digital delivery OUR APPROACH Our aim is to reduce water consumption, minimise our waste, and use energy efficiently. Preserving resources OUR APPROACH Repeat business is the recognition that we’re looking for - but it’s nice to pick up an award or two along the way. Awards ABOUT We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH We must deliver quality solutions in a cost and efficient way. Doing so ensures we add value for our clients and continue to thrive as an organisation. How do we achieve this? Through our Quality, Cost & Efficiency Strategy. Quality, cost and efficiency OUR APPROACH JN Bentley Ltd is part of the global management, engineering and development consultancy Mott MacDonald, offering our clients full feasibility, design and construction services throughout the UK. Who we are ABOUT Our team brings together the full expertise that we can offer in process, mechanical and electrical engineering and programme management, with support as required from the wider organisation. JN Bentley is privileged to have worked with some prestigious hydropower clients such as Northumbrian Water, British Waterways and The Small Hydro Company, undertaking hydroturbine design, refurbishment and installations waste water screw generators, clean water generators and combined heat and power (CHP) systems. We have also established some important supply chain relationships in the renewable energy market to help us deliver our hydropower schemes, including collaborative working agreements with the likes of Spaans Babcock and Zeropex. Renewables JN Bentley’s move into renewable energy, particularly the hydropower market, was a natural progression from the expertise gained over many years with our water sector clients and from other environmental projects. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

JN Bentley's "Operations" page emphasizes innovative, safe, and efficient civil engineering design and construction, focusing on client collaboration Operations We pride ourselves on working with clients to find innovative solutions to traditional construction problems and applying the latest information technology to help drive efficiencies and reduce waste, without compromising on quality. Back Next About us Introducing JN Bentley Vision and values Publications Virtual reality Digital design Pushing the boundaries Teamwork and collaboration Supporting society Digital construction Operations At the heart of our operations is the safe, innovative and cost-effective design and construction of great civil engineering projects. 100+ construction sites UK-wide 800 directly-employed labour workforce 2,000 employees 12 office bases Because we care about our clients, their customers, and the solutions we provide, we’re awarded repeat-business. Clients appoint us to long-term frameworks and call on our services when deadlines are tight, when they need an emergency response, and when the work needs a team of people willing to go that extra mile. Every year we deliver hundreds of projects across the UK in the water, environmental, industrial building, highways, gas and defence sectors. Check out the expertise pages to see the very best, most interesting and innovative work that JN Bentley, MMB and JBA Bentley have to offer. ~ Tasked with delivering these projects is our talented team – a group of people who build and maintain lasting relationships with our clients and supply chain, doing so by working collaboratively and in a spirit of openness and honesty. 'Right first time' We focus on working in a way that makes customer operations safer, more efficient and more sustainable – completing our tasks ‘right first time’, on programme and within budget. Innovation There is a constant drive to find innovative means to traditional engineering problems. We’ve embraced Design for Manufacture and Assembly (DfMA) and new technologies such as BIM (Building Information Modelling). Large, directly-employed workforce Out on site is our large, directly-employed, highly-trained weekly resource. Directly-employing our own site teams means that everyone understands and is working to the high standards we demand when it comes to health, safety, environmental and quality management. Having such a workforce on board also means we can react more flexibly to the needs of our clients. It sets us apart. Support unit The backbone to our operations is our support unit. Working as one team, we have skilled people proving a raft of services including labour resourcing, training, QES support (quality, environment and safety), HR and payroll, recruitment, learning and development, wellbeing, compliance, finance, IT, communications, digital delivery, bidding and estimating, facilities, procurement, plant and transport. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

Explore JN Bentley's aerospace sector expertise, delivering high-quality projects at airports and for aviation clients with precision SA Weston At a business park close to Head Office in Skipton, we designed and built a new bespoke production facility with integral offices and amenity accommodation for this leading supplier of complex precision machined components. Rolls-Royce plc We have a long association with Rolls-Royce plc and have worked together across a number of different sites, delivering over 100 design-and-build and commission-only projects from small external works to brand new multi-million pound facilities. Back Next About us Introducing JN Bentley Vision and values Publications The project involved the design and construction of a new bespoke production facility with integral offices and amenity accommodation at the West Craven Business Park, Earby, Lancashire. The project involved significant earthworks, sub-structure and superstructure works. We provided full ‘turn-key’ internal fit out and services installations, as well as all associated external hard and soft landscaping. The scheme involved extensive drainage works via a series of silt traps and oil interceptors and a foul pump station. Weston EU The project involved the design and construction of a new bespoke production facility with integral offices and amenity accommodation at the West Craven Business Park, Earby, Lancashire. The project involved significant earthworks, sub-structure and superstructure works. We provided full ‘turn-key’ internal fit out and services installations, as well as all associated external hard and soft landscaping. The scheme involved extensive drainage works via a series of silt traps and oil interceptors and a foul pump station. Weston EU We carried out the design and construction of a new 7,000m² compression facility to replace their existing machine shop. Enabling works ahead of the main contract included diversion of overhead power lines and diversion of the high voltage network. Following on from this we constructed a portal frame extension of the Wide Chord Fan Blade Module 2 building. The third structure in the package was the design and construction of a new portal frame facility to house a de-bonding process for jet engine fan blades. Rolls-Royce We carried out the design and construction of a new 7,000m² compression facility to replace their existing machine shop. Enabling works ahead of the main contract included diversion of overhead power lines and diversion of the high voltage network. Following on from this we constructed a portal frame extension of the Wide Chord Fan Blade Module 2 building. The third structure in the package was the design and construction of a new portal frame facility to house a de-bonding process for jet engine fan blades. Rolls-Royce We have completed a number of projects for Multiflight as part of a developments to improve private aircraft facilities at LBIA. One of the largest projects was the construction of two new aircraft hangars together with associated drainage and external works. The works included foundations, detailed design and erection of steelwork, reinforced concrete floor slab, detailed design and erection of roof and wall cladding, hangar doors and mechanical and electrical services. Multiflight We have completed a number of projects for Multiflight as part of a developments to improve private aircraft facilities at LBIA. One of the largest projects was the construction of two new aircraft hangars together with associated drainage and external works. The works included foundations, detailed design and erection of steelwork, reinforced concrete floor slab, detailed design and erection of roof and wall cladding, hangar doors and mechanical and electrical services. Multiflight We have delivered numerous projects at Leeds Bradford Airpoirt, upgrading the facilities for an enhanced customer experience. Works have included the expansion of the aircraft parking apron, new access roads and car parking. We also constructed a large surface water attenuation lagoon with outfall structures, soakaways, and extensive drainage via interceptors from the main car parks and access road. Leeds Bradford Airport We have delivered numerous projects at Leeds Bradford Airpoirt, upgrading the facilities for an enhanced customer experience. Works have included the expansion of the aircraft parking apron, new access roads and car parking. We also constructed a large surface water attenuation lagoon with outfall structures, soakaways, and extensive drainage via interceptors from the main car parks and access road. Leeds Bradford Airport Our aim is to reduce water consumption, minimise our waste, and use energy efficiently. Preserving resources OUR APPROACH JN Bentley Ltd is part of the global management, engineering and development consultancy Mott MacDonald, offering our clients full feasibility, design and construction services throughout the UK. Who we are ABOUT We must deliver quality solutions in a cost and efficient way. Doing so ensures we add value for our clients and continue to thrive as an organisation. How do we achieve this? Through our Quality, Cost & Efficiency Strategy. Quality, cost and efficiency OUR APPROACH Repeat business is the recognition that we’re looking for - but it’s nice to pick up an award or two along the way. Awards ABOUT Digital rehearsal optimises how we plan the construction phase of our projects. Digital rehearsal OUR APPROACH We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH We are accustomed to working in operational airside environments, particularly through our work at Leeds Bradford Airport and the British Aerospace site at Broughton, near Chester. We have significant experience of carrying out concrete paving works, including runway aprons and taxiways. Through our experience of working with clients in this sector, we understand their requirements for carrying out works with minimal disruption to their customers. We are also experienced in delivering projects that meet exacting quality standards, evidenced not only through our airside projects but for work with aviation suppliers including Rolls-Royce, the Metal Improvement Company and Weston EU. Aerospace At JN Bentley we pride ourselves on delivering quality craftsmanship to our aerospace clients, which have included Leeds Bradford Airport and Multiflight. Our experience includes: Aprons Taxiways Terminal forecourts and buildings Aircraft hangars Production facilities Mechanical, electrical, instrumentation, control and automation works Access roads and car parks Ancillary works, including security, infrastructure and utilities, fuel storage and landscaping Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...

JN Bentley's "Digital Design" page highlights their innovative, low-carbon engineering designs using cutting-edge digital tools and the Moata platform Back Next About us Introducing JN Bentley Vision and values Publications We must deliver quality solutions in a cost and efficient way. Doing so ensures we add value for our clients and continue to thrive as an organisation. How do we achieve this? Through our Quality, Cost & Efficiency Strategy. Quality, cost and efficiency OUR APPROACH Health and safety We integrate inclusion and belonging, professional and personal development, and health and wellbeing into our business culture. People OUR APPROACH People This is an overview of digital in JN Bentley, including our investment in digital delivery and our company digital transformation and how it is embedded in everything we do. Digital delivery OUR APPROACH Supporting society Digital design We use cutting edge digital tools and processes to produce engineering designs that are innovative, low carbon, and safe to build, operate, maintain and demolish. Through global enterprise agreements with industry leading technology companies, we provide our staff with the latest tools available to operate at their full potential. We use our own industry-leading digital solutions platform, Moata , to help solve our clients’ pressing problems using the power of data. An example is Moata Carbon Portal , which is used across all of our projects, standardising the way we calculate and reduce embodied carbon in the assets we design and construct for our clients. Case study: BIM 360/Autodesk Construction cloud BIM 360 is a common data environment (CDE) that we use to manage our graphical data. It supports informed decision-making throughout the project lifecycle for project design and construction teams. It enables multiple people to access data from a single source of information where colleagues, suppliers, and our clients can collaborate at the same time, as one team. It allows team members to interact with our 3D model design, collaborate with other team members and raise issues connected with specific parts of the model. It also ensures that our designs are following our standard information management procedures. Case study: Moata solutions – Strategic Pipeline Alliance (SPA) We’re continuing to use our Moata Geospatial and Moata Land Management solutions in the Strategic Pipeline Alliance (SPA) to deliver significant savings on this important piece of national infrastructure. Moata Land Management was used to provide all parties involved in project design and delivery and members of the Alliance access to the same data through a single database. This enabled a coordinated and consistent approach to identifying landowners, managing land access and survey requests with stakeholders. The solutions alone have saved an estimated £2 million over 18 months. Moata has allowed the SPA team to efficiently analyse data and derive insights, improving outcomes. Case study: Moata solutions – Living with Water Used together, Moata Geospatial and Moata Inspect aid collaboration on project data with easy data capture, review and monitoring. Living With Water is a partnership between Yorkshire Water, Hull City Council, East Riding of Yorkshire Council, the Environment Agency and the University of Hull, working together to build flood resilience, develop innovative water management systems, and highlight the region as a great place to live, work and visit. We used Moata Geospatial and Moata Inspect to help collect digital survey data and present it on a GIS map platform with other geospatial data in a fully digital workflow. This provided a comprehensive view of the data collection and allowed the team to make informed, right first time decisions. Case study: Moata solutions - Intelligent content Moata Intelligent Content (MIC) is our digital component catalogue with easy-to-use access to a vast, fully managed library of standardised design, procurement, construction and commissioning documentation. MIC allows teams to repeat the delivery of projects to achieve our vision of increased efficiency. Intelligent Content is a vital way of using the digital knowledge capital we generate as our primary output, enabling us to deliver better services to our clients. Publications Our heritage Our policies Awards Who we are > Ethics Vision and values > About us Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. Close Supply chain Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles. FEATURED NEWS ARTICLE Close News View all Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading... Loading...